Shelly 4 Pro is DIN mountable in standard electricity box. With Shelly 4 Pro you can control 4 electricity chains, 10 amperes each (4 x 2400 W). You can also receive a real time consumption information.
With Shelly 4 Pro you can control your home directly through your mobile phone, no matter where you are.
Shelly 4 Pro doesn’t need a controller to be accessible. With a few simple steps you add it to the local Wi-Fi connection.
Shelly 4 Pro has a 1.8 inch colour information screen which provides information about the status of each electricity chain connected.
110-230V ±10%, 50/60Hz AC, 25-60 V DC Shelly 4 PRO is compatible with all major international voltage standards.
4 Channel up to 9,2 KW controlling power
Maximum load current per output is 10A / 230V 50/60Hz or 2300 W. You can control a wide range of home appliances and office equipment.
Shelly has an integrated precise power meter. You can measure the overall consumption of all the electric devices you are controlling.
Embedded WEB Server
You can control any electrical equipment up to 8A per channel. Thus you can control a wide range of home appliances and office equipment.
802.11 b/g/n (2.4 GHz)
Shelly™ 4Pro can connect to any Wi-Fi network or can operate as an Access Point
You can set the on/off time for each channel, or just follow the sunrise and sunset for your location. Shelly 4 Pro has intelligence as never seen before.
By using Shelly 4 Pro you can control any electrical device in your home.
Shelly 4 Pro connects with your home Wi-Fi, then with Shelly Cloud. From the Cloud you can manage and operate the device from anywhere in the world.
Shelly 4 Pro has 3 connection modes:
Access Point Mode
You can set up and control any device by simply connecting your smart phone to Shelly 4 Pro and open the Shelly 4 Pro control page on the WEB server, embedded in the relay.
Connect Shelly 4 Pro to your local Wi-Fi network in order to control any electrical device at home. You can control up to 65000 Shelly 4 Pro relays in a Wi-Fi network, therefore many more appliances through the WiFi-operated relays.
Shelly 4 Pro can be accessed from anywhere in the world. After installing and connecting it to a Wi-Fi network with internet access, download and install the Shelly Cloud mobile application (for Android or iOS), connect all your Shelly 4 Pro relays to your account and create scenarios with just a few clicks.
Each Shelly 4 Pro relay can control 4 electricity chains. If placed in your home breakers box, it can control: lights, heating, switches, sockets, etc in the room.
With just a few Shelly 4 Pro relays you can control and monitor the consumption of each electricity device in your home.
MAKE NEW HOMES SMART
Shelly 4 Pro is a Low-cost Home automation device designed especially for newly built homes.
With Shelly 4 Pro you use 20% less cables compared to standard cabling.
Shelly 4 Pro makes your home smart for 1 Euro per square meter.
Built-in the breakers box, Shelly 4 Pro is part of the electricity installation of the new home even with its completion.
4x Power Metering
Shelly 4 Pro has an integrated power meter for each channel.
You can measure the energy consumption of the equipment controlled by the Shelly 4 Pro.
You can automatically shut the electricity down when the consumption target is reached or overpower is detected.
Install your Shelly 4PRO relay into the home breakers box and connect it to your Wi-Fi network.